Endmills for pre-hardened and hardened steel(HRc52~70)

Good wear resistance by high quality Si-based PVD coating.

High precise edge tolerance.

Very nice work surface finish.

Outstanding performance at high speed machining by ultra fine

(0.2 ) WC grade

Good wear resistance by high quality Si-based PVD coating.

High precise edge tolerance.

Very nice work surface finish.

Outstanding performance at high speed machining by ultra fine

(0.2 ) WC grade

Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
---|---|---|---|---|---|---|---|

MTI-2JJB.001.002.S04 | 0.05R X 0.1 ZZZ | 0.2 | 40 | 4 | ask a quote | ||

MTI-2JJB.001.5003.S04 | 0.075R X 0.15 | 0.3 | 40 | 4 | ask a quote | ||

MTI-2JJB.002.004.S04 | 0.1R X 0.2 | 0.4 | 40 | 4 | ask a quote | ||

MTI-2JJB.003.006.S04 | 0.15R X 0.3 | 0.6 | 40 | 4 | ask a quote | ||

MTI-2JJB.004.008.S04 | 0.2R X 0.4 | 0.8 | 40 | 4 | ask a quote | ||

MTI-2JJB.005.010.S04 | 0.25R X 0.5 | 1 | 45 | 4 | ask a quote | ||

MTI-2JJB.006.012.S04 | 0.3R X 0.6 | 1.2 | 45 | 4 | ask a quote | ||

MTI-2JJB.007.015.S04 | 0.35R X 0.7 | 1.5 | 45 | 4 | ask a quote | ||

MTI-2JJB.008.020.S04 | 0.4R X 0.8 | 2 | 45 | 4 | ask a quote | ||

MTI-2JJB.009.020.S04 | 0.45R X 0.9 | 2 | 45 | 4 | ask a quote | ||

MTI-2JJB.010.025.070 | 0.5R X 1 | 2.5 | 70 | 6 | ask a quote | ||

MTI-2JJB.010.025.S03 | 0.5R X 1 | 2.5 | 50 | 3 | ask a quote | ||

MTI-2JJB.010.025.S04 | 0.5R X 1 | 2.5 | 50 | 4 | ask a quote | ||

MTI-2JJB.010.025.S06 | 0.5R X 1 | 2.5 | 50 | 6 | ask a quote | ||

MTI-2JJB.012.030.S03 | 0.6R X 1.2 | 3 | 50 | 3 | ask a quote | ||

MTI-2JJB.012.030.S04 | 0.6R X 1.2 | 3 | 50 | 4 | ask a quote | ||

MTI-2JJB.015.040.070 | 0.75R X 1.5 | 4 | 70 | 6 | ask a quote | ||

MTI-2JJB.015.040.S03 | 0.75R X 1.5 | 4 | 50 | 3 | ask a quote | ||

MTI-2JJB.015.040.S04 | 0.75R X 1.5 | 4 | 50 | 4 | ask a quote | ||

MTI-2JJB.015.040.S06 | 0.75R X 1.5 | 4 | 50 | 6 | ask a quote | ||

MTI-2JJB.020.050.075 | 1R X 2 | 5 | 75 | 6 | ask a quote | ||

MTI-2JJB.020.050.S03 | 1R X 2 | 5 | 50 | 3 | ask a quote | ||

Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||

MTI-2JJB.020.050.S04 | 1R X 2 | 5 | 50 | 4 | ask a quote | ||

MTI-2JJB.020.050.S06 | 1R X 2 | 5 | 50 | 6 | ask a quote | ||

MTI-2JJB.025.060.S03 | 1.25R X 2.5 | 6 | 50 | 3 | ask a quote | ||

MTI-2JJB.025.060.S04 | 1.25R X 2.5 | 6 | 50 | 4 | ask a quote | ||

MTI-2JJB.025.060.S06 | 1.25R X 2.5 | 6 | 75 | 6 | ask a quote | ||

MTI-2JJB.030.080.080 | 1.5R X 3 | 8 | 80 | 6 | ask a quote | ||

MTI-2JJB.030.080.S03 | 1.5R X 3 | 8 | 50 | 3 | ask a quote | ||

MTI-2JJB.030.080.S04 | 1.5R X 3 | 8 | 50 | 4 | ask a quote | ||

MTI-2JJB.030.080.S06 | 1.5R X 3 | 8 | 60 | 6 | ask a quote | ||

MTI-2JJB.035.080.S06 | 1.75R X 3.5 | 8 | 60 | 6 | ask a quote | ||

MTI-2JJB.040.080.080 | 2R X 4 | 8 | 80 | 4 | ask a quote | ||

MTI-2JJB.040.080.090 | 2R X 4 | 8 | 90 | 6 | ask a quote | ||

MTI-2JJB.040.080.S04 | 2R X 4 | 8 | 60 | 4 | ask a quote | ||

MTI-2JJB.040.080.S06 | 2R X 4 | 8 | 70 | 6 | ask a quote | ||

MTI-2JJB.045.080.S06 | 2.25R x 4.5 | 8 | 70 | 6 | ask a quote | ||

MTI-2JJB.050.100.S06 | 2.5R X 5 | 10 | 75 | 6 | ask a quote | ||

MTI-2JJB.055.100.S06 | 2.75R x 5.5 | 10 | 75 | 6 | ask a quote | ||

MTI-2JJB.060.100.060 | 3R X 6 | 10 | 60 | 6 | ask a quote | ||

MTI-2JJB.060.120.080 | 3R x 6 | 12 | 80 | 6 | ask a quote | ||

MTI-2JJB.060.120.090 | 3R X 6 | 12 | 90 | 6 | ask a quote | ||

MTI-2JJB.070.140.S08 | 3.5R x 7 | 14 | 80 | 8 | ask a quote | ||

MTI-2JJB.080.120.060 | 4R X 8 | 12 | 60 | 8 | ask a quote | ||

MTI-2JJB.080.140.090 | 4R x 8 | 14 | 90 | 8 | ask a quote | ||

MTI-2JJB.080.140.100 | 4R X 8 | 14 | 100 | 8 | ask a quote | ||

MTI-2JJB.100.150.070 | 5R X 10 | 15 | 70 | 10 | ask a quote | ||

MTI-2JJB.100.180.100 | 5R X 10 | 18 | 100 | 10 | ask a quote | ||

MTI-2JJB.120.180.075 | 6R X 12 | 18 | 75 | 12 | ask a quote | ||

MTI-2JJB.120.220.110 | 6R X 12 | 22 | 110 | 12 | ask a quote | ||

MTI-2JJB.140.240.110 | 7R X 14 | 24 | 110 | 14 | ask a quote |