Aluminium Applied ult... --> 3 flutes --> Roughing end mills --> Aluminium Applied ultra
High speed semi finishing and roughing endmills for
Aluminum, AL alloy, non-ferrous and non-metallic materials.
J-Max coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Minimize built up edge by chip braker and deep pocket design.
Good surface integrity differently from
competitor’s AL roughing endmills.
Minimize fracturing at high feed by high
TRS ultra fine WC grade.
Aluminum, AL alloy, non-ferrous and non-metallic materials.
J-Max coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Minimize built up edge by chip braker and deep pocket design.
Good surface integrity differently from
competitor’s AL roughing endmills.
Minimize fracturing at high feed by high
TRS ultra fine WC grade.
| Part Number | Diameter D | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-3ARE.060.150.S06 | 6 | 10 | 15 | 50 | 6 | ask a quote | ||
| MTI-3ARE.060.200.S06 | 6 | 15 | 20 | 70 | 6 | ask a quote | ||
| MTI-3ARE.080.200.S08 | 8 | 15 | 20 | 60 | 8 | ask a quote | ||
| MTI-3ARE.080.250.S08 | 8 | 20 | 25 | 80 | 8 | ask a quote | ||
| MTI-3ARE.100.250.S10 | 10 | 18 | 25 | 70 | 10 | ask a quote | ||
| MTI-3ARE.100.300.S10 | 10 | 23 | 30 | 90 | 10 | ask a quote | ||
| MTI-3ARE.120.300.S12 | 12 | 20 | 30 | 80 | 12 | ask a quote | ||
| MTI-3ARE.120.400.S12 | 12 | 30 | 40 | 100 | 12 | ask a quote | ||
| MTI-3ARE.160.350.S16 | 16 | 25 | 35 | 110 | 16 | ask a quote | ||
| MTI-3ARE.160.500.S16 | 16 | 35 | 50 | 120 | 16 | ask a quote | ||
| MTI-3ARE.200.500.S20 | 20 | 35 | 50 | 110 | 20 | ask a quote | ||
| MTI-3ARE.200.600.S20 | 20 | 45 | 60 | 120 | 20 | ask a quote |
