Aluminium Applied ult... --> 3 flutes --> --> Aluminium Applied ultra
High speed semi finishing and roughing endmills for
Aluminum, AL alloy, non-ferrous and non-metallic materials.
Minimize built up edge by chip braker and deep pocket design.
High speed roughing applicable by 45 helix fine pitch flute.
Minimize fracturing at high feed by high TRS ultra fine WC grade.
Aluminum, AL alloy, non-ferrous and non-metallic materials.
Minimize built up edge by chip braker and deep pocket design.
High speed roughing applicable by 45 helix fine pitch flute.
Minimize fracturing at high feed by high TRS ultra fine WC grade.
| Part Number | Diameter D | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-3AROC.040.080.S06 | 4 | 8 | - | 50 | 6 | ask a quote | ||
| MTI-3AROC.040.150.S06 | 4 | 10 | 15 | 60 | 6 | ask a quote | ||
| MTI-3AROC.050.100.S06 | 5 | 10 | - | 60 | 6 | ask a quote | ||
| MTI-3AROC.050.200.S06 | 5 | 15 | 20 | 60 | 6 | ask a quote | ||
| MTI-3AROC.060.120.S06 | 6 | 12 | - | 60 | 6 | ask a quote | ||
| MTI-3AROC.060.210.S06 | 6 | 16 | 21 | 65 | 6 | ask a quote | ||
| MTI-3AROC.080.160.S08 | 8 | 16 | - | 70 | 8 | ask a quote | ||
| MTI-3AROC.080.270.S08 | 8 | 21 | 27 | 70 | 8 | ask a quote | ||
| MTI-3AROC.100.200.S10 | 10 | 20 | - | 70 | 10 | ask a quote | ||
| MTI-3AROC.100.310.S10 | 10 | 26 | 31 | 75 | 10 | ask a quote | ||
| MTI-3AROC.120.240.S12 | 12 | 24 | - | 75 | 12 | ask a quote | ||
| MTI-3AROC.120.380.S12 | 12 | 30 | 38 | 80 | 12 | ask a quote | ||
| MTI-3AROC.160.320.S16 | 16 | 32 | - | 100 | 16 | ask a quote | ||
| MTI-3AROC.160.450.S16 | 16 | 36 | 45 | 100 | 16 | ask a quote | ||
| MTI-3AROC.200.550.S20 | 20 | 41 | 55 | 110 | 20 | ask a quote |
