Hard Steels High spee... --> 4-6 flutes --> --> Hard Steels High speed p
4-6JJDRC - 4-6 Flutes JJ Double Corner Radius Cutter TISIN-S Coating HRc 52~70 
Endmills for pre-hardened and hardened steel(HRc52~70)
Good wear resistance by high quality Si-based PVD coating.
Designed for low speed with high feed condition.
Suitable for heavy duty and roughing application.
Applied multi-radius design on the endface of the tool, reduced
cutting stress by splitting small chip emission.
Good wear resistance by high quality Si-based PVD coating.
Designed for low speed with high feed condition.
Suitable for heavy duty and roughing application.
Applied multi-radius design on the endface of the tool, reduced
cutting stress by splitting small chip emission.
| Part Number | Diameter D | Angle | Large Radius R1 | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|---|---|
| MTI-4JJDRC.010.010.030 | 1 | 4° | 3 | 1 | 0.1 | 0.28 | 1 | ask a quote | ||
| MTI-4JJDRC.020.020.060 | 2 | 6° | 6 | 2 | 0.1 | 0.56 | 2 | ask a quote | ||
| MTI-4JJDRC.030.030.090 | 3 | 6° | 9 | 3 | 0.2 | 0.68 | 3 | ask a quote | ||
| MTI-4JJDRC.040.040.120 | 4 | 6° | 12 | 4 | 0.2 | 0.8 | 4 | ask a quote | ||
| MTI-4JJDRC.050.050.150 | 5 | 6° | 15 | 5 | 0.3 | 1.08 | 5 | ask a quote | ||
| MTI-6JJDRC.060.060.180 | 6 | 6° | 18 | 6 | 0.3 | 1.22 | 6 | ask a quote | ||
| MTI-6JJDRC.080.080.240 | 8 | 8° | 24 | 8 | 0.5 | 1.76 | 8 | ask a quote | ||
| MTI-6JJDRC.100.100.300 | 10 | 10° | 30 | 10 | 0.5 | 2.02 | 10 | ask a quote | ||
| MTI-6JJDRC.120.120.360 | 12 | 12° | 36 | 12 | 0.5 | 2.28 | 12 | ask a quote | ||
| MTI-6JJDRC.160.160.450 | 16 | 16° | 45 | 16 | 0.8 | 2.8 | 16 | ask a quote |
