Outstanding performan... --> 4 flutes --> End mills --> all materials
Endmills for pre-hardened and hardened steel(HRc50~62)
Good wear resistance by Si-based PVD coating.
High precise edge tolerance.
Reinforced edge design for preventing edge chipping.
45 degree helix design for high speed, feed condition.
Outstanding performance at high speed machining by ultra fine
(0.2 ) WC grade.
Good wear resistance by Si-based PVD coating.
High precise edge tolerance.
Reinforced edge design for preventing edge chipping.
45 degree helix design for high speed, feed condition.
Outstanding performance at high speed machining by ultra fine
(0.2 ) WC grade.
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|
| MTI-4HEM.010.025.S06 | 1 | 2.5 | 40 | 6 | ask a quote | ||
| MTI-4HEM.010.035.S06 | 1 | 3.5 | 40 | 6 | ask a quote | ||
| MTI-4HEM.010.050.S06 | 1 | 5 | 45 | 6 | ask a quote | ||
| MTI-4HEM.012.030.S06 | 1.2 | 3 | 40 | 6 | ask a quote | ||
| MTI-4HEM.015.040.S06 | 1.5 | 4 | 40 | 6 | ask a quote | ||
| MTI-4HEM.015.060.S06 | 1.5 | 6 | 40 | 6 | ask a quote | ||
| MTI-4HEM.015.080.S06 | 1.5 | 8 | 45 | 6 | ask a quote | ||
| MTI-4HEM.020.050.S06 | 2 | 5 | 40 | 6 | ask a quote | ||
| MTI-4HEM.020.080.S06 | 2 | 8 | 45 | 6 | ask a quote | ||
| MTI-4HEM.020.100.S06 | 2 | 10 | 50 | 6 | ask a quote | ||
| MTI-4HEM.030.080.S06 | 3 | 8 | 45 | 6 | ask a quote | ||
| MTI-4HEM.030.120.S06 | 3 | 12 | 50 | 6 | ask a quote | ||
| MTI-4HEM.030.150.S06 | 3 | 15 | 55 | 6 | ask a quote | ||
| MTI-4HEM.040.110.S06 | 4 | 11 | 45 | 6 | ask a quote | ||
| MTI-4HEM.040.160.S06 | 4 | 16 | 55 | 6 | ask a quote | ||
| MTI-4HEM.040.200.S06 | 4 | 20 | 60 | 6 | ask a quote | ||
| MTI-4HEM.050.130.S06 | 5 | 13 | 50 | 6 | ask a quote | ||
| MTI-4HEM.050.180.S06 | 5 | 18 | 60 | 6 | ask a quote | ||
| MTI-4HEM.050.250.S06 | 5 | 25 | 70 | 6 | ask a quote | ||
| MTI-4HEM.060.130.S06 | 6 | 13 | 50 | 6 | ask a quote | ||
| MTI-4HEM.060.200.S06 | 6 | 20 | 60 | 6 | ask a quote | ||
| MTI-4HEM.060.250.S06 | 6 | 25 | 70 | 6 | ask a quote | ||
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
| MTI-4HEM.080.200.S08 | 8 | 20 | 60 | 8 | ask a quote | ||
| MTI-4HEM.080.250.S08 | 8 | 25 | 70 | 8 | ask a quote | ||
| MTI-4HEM.080.300.S08 | 8 | 30 | 75 | 8 | ask a quote | ||
| MTI-4HEM.080.400.S08 | 8 | 40 | 90 | 8 | ask a quote | ||
| MTI-4HEM.100.220.S10 | 10 | 22 | 70 | 10 | ask a quote | ||
| MTI-4HEM.100.300.S10 | 10 | 30 | 80 | 10 | ask a quote | ||
| MTI-4HEM.100.400.S10 | 10 | 40 | 90 | 10 | ask a quote | ||
| MTI-4HEM.100.500.S10 | 10 | 50 | 100 | 10 | ask a quote | ||
| MTI-4HEM.120.260.S12 | 12 | 26 | 75 | 12 | ask a quote | ||
| MTI-4HEM.120.400.S12 | 12 | 40 | 90 | 12 | ask a quote | ||
| MTI-4HEM.120.500.S12 | 12 | 50 | 100 | 12 | ask a quote | ||
| MTI-4HEM.120.600.S12 | 12 | 60 | 110 | 12 | ask a quote | ||
| MTI-4HEM.140.300.S14 | 14 | 30 | 80 | 14 | ask a quote | ||
| MTI-4HEM.140.500.S14 | 14 | 50 | 110 | 14 | ask a quote | ||
| MTI-4HEM.160.350.S16 | 16 | 35 | 90 | 16 | ask a quote | ||
| MTI-4HEM.160.500.S16 | 16 | 50 | 110 | 16 | ask a quote | ||
| MTI-4HEM.160.650.S16 | 16 | 65 | 120 | 16 | ask a quote | ||
| MTI-4HEM.200.400.S20 | 20 | 40 | 100 | 20 | ask a quote | ||
| MTI-4HEM.200.500.S20 | 20 | 50 | 110 | 20 | ask a quote | ||
| MTI-4HEM.200.700.S20 | 20 | 70 | 130 | 20 | ask a quote | ||
| MTI-4HEM.250.800.S25 | 25 | 80 | 160 | 25 | ask a quote |
