4LSUC - 4 Flutes Long Length Corner Radius End Mills for SUS  

Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
Strong design for protection against chattering..
Preventing bottom edge chipping by corner R.
Minimize fracturing at high feed by high TRS fine WC grade.
Part Number Diameter DLength of cut L1Overall length LShank dia d Price
MTI-4LSUC.060.003.070 6*R0.3 30706 ask a quote
MTI-4LSUC.060.005.070 6*R0.5 30706 ask a quote
MTI-4LSUC.060.010.070 6*R1 30706 ask a quote
MTI-4LSUC.060.015.070 6*R1.5 30706 ask a quote
MTI-4LSUC.080.003.080 8*R0.3 40808 ask a quote
MTI-4LSUC.080.005.080 8*R0.5 40808 ask a quote
MTI-4LSUC.080.010.080 8*R1 40808 ask a quote
MTI-4LSUC.080.015.080 8*R1.5 40808 ask a quote
MTI-4LSUC.080.020.080 8*R2 40808 ask a quote
MTI-4LSUC.100.003.100 10*R0.3 5010010 ask a quote
MTI-4LSUC.100.005.100 10*R0.5 5010010 ask a quote
MTI-4LSUC.100.010.100 10*R1 5010010 ask a quote
MTI-4LSUC.100.015.100 10*R1.5 5010010 ask a quote
MTI-4LSUC.100.020.100 10*R2 5010010 ask a quote
MTI-4LSUC.120.003.120 12*R0.3 6012012 ask a quote
MTI-4LSUC.120.005.120 12*R0.5 6012012 ask a quote
MTI-4LSUC.120.010.120 12*R1 6012012 ask a quote
MTI-4LSUC.120.015.120 12*R1.5 6012012 ask a quote
MTI-4LSUC.120.020.120 12*R2 6012012 ask a quote
MTI-4LSUC.120.025.120 12*R2.5 6012012 ask a quote
MTI-4LSUC.120.030.120 12*R3 6012012 ask a quote
MTI-4LSUC.160.005.130 16*R0.5 8013016 ask a quote
Part Number Diameter DLength of cut L1Overall length LShank dia d Price
MTI-4LSUC.160.010.130 16*R1 8013016 ask a quote
MTI-4LSUC.160.015.130 16*R1.5 8013016 ask a quote
MTI-4LSUC.160.020.130 16*R2 8013016 ask a quote
MTI-4LSUC.160.030.130 16*R3 8013016 ask a quote
MTI-4LSUC.200.005.160 20*R0.5 10016020 ask a quote
MTI-4LSUC.200.010.160 20*R1 10016020 ask a quote
MTI-4LSUC.200.015.160 20*R1.5 10016020 ask a quote
MTI-4LSUC.200.020.160 20*R2 10016020 ask a quote
MTI-4LSUC.200.030.160 20*R3 10016020 ask a quote