SUS Alloy Steel and h... --> 4 flutes --> Radius end mill --> SUS Alloy Steel and hard

4SUR - 4 Flutes Corner Radius End Mills for SUS  

Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel
and hard to cut materials.
JCRO coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Minimize chattering by unequal flute spacing design.
Excellent work surface finish by 4 flute and deep chip pocket.
Minimize fracturing at high feed by high TRS fine WC grade.
Part Number Diameter DLength of cut L1Effective length L2Overall length LShank dia d Price
MTI-4SUR.050.002.S06 5 X R0.2 13-506 ask a quote
MTI-4SUR.060.002.200 6 X R0.2 1020606 ask a quote
MTI-4SUR.060.002.S06 6 X R0.2 13-606 ask a quote
MTI-4SUR.060.005.S06 6 X R0.5 13-606 ask a quote
MTI-4SUR.070.002.S08 7X R0.2 18-708 ask a quote
MTI-4SUR.080.002.250 8X R0.2 1225708 ask a quote
MTI-4SUR.080.002.S08 8X R0.2 19-708 ask a quote
MTI-4SUR.080.010.S08 8 X R1 19-708 ask a quote
MTI-4SUR.090.003.S10 9 X R0.3 20-7010 ask a quote
MTI-4SUR.100.003.300 10 X R0.3 15307510 ask a quote
MTI-4SUR.100.003.S10 10 X R0.3 22-7510 ask a quote
MTI-4SUR.100.010.S10 10 X R1 22-7510 ask a quote
MTI-4SUR.110.003.S12 11 X R0.3 25-8012 ask a quote
MTI-4SUR.120.003.350 12 X R0.3 20358012 ask a quote
MTI-4SUR.120.003.S12 12 X R0.3 26-8012 ask a quote
MTI-4SUR.120.010.S12 12 X R1 26-8012 ask a quote