V-Series --> 4 flutes --> --> SUS Alloy Steel and hard
Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel
and hard to cut materials.
JCRO coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Strong design for protection against chattering..
Preventing bottom edge chipping by corner R.
Minimize fracturing at high feed by high TRS fine WC grade.
and hard to cut materials.
JCRO coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Strong design for protection against chattering..
Preventing bottom edge chipping by corner R.
Minimize fracturing at high feed by high TRS fine WC grade.
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|
| MTI-4VSC.010.001.S06 | 1 X R0.1 | 2.5 | 50 | 6 | ask a quote |  | |
| MTI-4VSC.010.002.S06 | 1 X R0.2 | 2.5 | 50 | 6 | ask a quote | | |
| MTI-4VSC.012.001.S06 | 1.2 X R0.1 | 3 | 50 | 6 | ask a quote | | |
| MTI-4VSC.012.002.S06 | 1.2 X R0.2 | 3 | 50 | 6 | ask a quote | | |
| MTI-4VSC.015.001.S06 | 1.5 X R0.1 | 4 | 50 | 6 | ask a quote | | |
| MTI-4VSC.015.002.S06 | 1.5 X R0.2 | 4 | 50 | 6 | ask a quote | | |
| MTI-4VSC.020.001.S06 | 2 X R0.1 | 6 | 50 | 6 | ask a quote | | |
| MTI-4VSC.020.002.S06 | 2 X R0.2 | 6 | 50 | 6 | ask a quote | | |
| MTI-4VSC.025.001.S06 | 2.5 X R0.1 | 7 | 50 | 6 | ask a quote | | |
| MTI-4VSC.025.002.S06 | 2.5 X R0.2 | 7 | 50 | 6 | ask a quote | | |
| MTI-4VSC.030.002.S06 | 3 X R0.2 | 8 | 50 | 6 | ask a quote | | |
| MTI-4VSC.030.003.S06 | 3 X R0.3 | 8 | 50 | 6 | ask a quote | | |
| MTI-4VSC.030.005.S06 | 3 X R0.5 | 8 | 50 | 6 | ask a quote | | |
| MTI-4VSC.040.002.S06 | 4 X R0.2 | 10 | 50 | 6 | ask a quote | | |
| MTI-4VSC.040.003.S06 | 4 X R0.3 | 10 | 50 | 6 | ask a quote | | |
| MTI-4VSC.040.005.S06 | 4 X R0.5 | 10 | 50 | 6 | ask a quote | | |
| MTI-4VSC.050.002.S06 | 5 X R0.2 | 15 | 60 | 6 | ask a quote | | |
| MTI-4VSC.050.003.S06 | 5 X R0.3 | 15 | 60 | 6 | ask a quote | | |
| MTI-4VSC.050.005.S06 | 5 X R0.5 | 15 | 60 | 6 | ask a quote | | |
| MTI-4VSC.060.002.S06 | 6 X R0.2 | 15 | 60 | 6 | ask a quote | | |
| MTI-4VSC.060.003.S06 | 6 X R0.3 | 15 | 60 | 6 | ask a quote | | |
| MTI-4VSC.060.005.S06 | 6 X R0.5 | 15 | 60 | 6 | ask a quote | | |
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
| MTI-4VSC.060.010.S06 | 6 X R1 | 15 | 60 | 6 | ask a quote | | |
| MTI-4VSC.080.003.S08 | 8 X R0.3 | 20 | 70 | 8 | ask a quote | | |
| MTI-4VSC.080.005.S08 | 8 X R0.5 | 20 | 70 | 8 | ask a quote | | |
| MTI-4VSC.080.010.S08 | 8 X R1 | 20 | 70 | 8 | ask a quote | | |
| MTI-4VSC.100.003.S10 | 10 X R0.3 | 25 | 75 | 10 | ask a quote | | |
| MTI-4VSC.100.005.S10 | 10 X R0.5 | 25 | 75 | 10 | ask a quote | | |
| MTI-4VSC.100.010.S10 | 10 X R1 | 25 | 75 | 10 | ask a quote | | |
| MTI-4VSC.100.010S.10W | 10X1 | 25 | 75 | 10 | ask a quote |  | |
| MTI-4VSC.100.015.S10 | 10 X R1.5 | 25 | 75 | 10 | ask a quote | | |
| MTI-4VSC.100.020.S10 | 10 X R2 | 25 | 75 | 10 | ask a quote | | |
| MTI-4VSC.120.005.S12 | 12 X R0.5 | 30 | 80 | 12 | ask a quote | | |
| MTI-4VSC.120.010.S12 | 12 X R1 | 30 | 80 | 12 | ask a quote | | |
| MTI-4VSC.120.020.S12 | 12 X R2 | 30 | 80 | 12 | ask a quote | | |
| MTI-4VSC.160.005.S16 | 16 X R0.5 | 40 | 100 | 16 | ask a quote | | |
| MTI-4VSC.160.010.S16 | 16 X R1 | 40 | 100 | 16 | ask a quote | | |
| MTI-4VSC.160.020.S16 | 16 X R2 | 40 | 100 | 16 | ask a quote | | |
| MTI-4VSC.160.030.S16 | 16 X R3 | 40 | 100 | 16 | ask a quote | | |
| MTI-4VSC.200.005.S20 | 20 X R0.5 | 45 | 100 | 20 | ask a quote | | |
| MTI-4VSC.200.010.S20 | 20 X R1 | 45 | 100 | 20 | ask a quote | | |
| MTI-4VSC.200.030.S20 | 20 X R3 | 45 | 100 | 20 | ask a quote | | |
| MTI-S4VSC200020S20W | 20 X R2 | 50 | 100 | 20 | ask a quote | |
