General Purpose Harde... --> 6 flutes --> --> all materials
Endmills for various work materials, hardened steel,
pre-hardened steel, tool steel and cast iron.
J-Max coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Minimize edge chipping by applying straight 4flutes design.
Various shapes and length provides optimum efficiency.
pre-hardened steel, tool steel and cast iron.
J-Max coating provides wear resistance improvement as well as
avoid edge stress in various applications.
Minimize edge chipping by applying straight 4flutes design.
Various shapes and length provides optimum efficiency.
| Part Number | Diameter D | Diameter neck D1 | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|---|---|
| MTI-6TAC.080.300.200 | 8 | 4 | 30° | 1.15 | 20 | 70 | 8 | ask a quote | ||
| MTI-6TAC.080.300.280 | 8 | ° | 1.15 | 28 | 70 | 8 | ask a quote | |||
| MTI-6TAC.080.450.200 | 8 | 4 | 45° | 2 | 20 | 70 | 8 | ask a quote | ||
| MTI-6TAC.080.450.280 | 8 | ° | 2 | 28 | 70 | 8 | ask a quote | |||
| MTI-6TAC.100.300.250 | 10 | 5 | 30° | 1.44 | 25 | 75 | 10 | ask a quote | ||
| MTI-6TAC.100.300.350 | 10 | ° | 1.44 | 35 | 75 | 10 | ask a quote | |||
| MTI-6TAC.100.450.250 | 10 | 5 | 45° | 2.5 | 25 | 75 | 10 | ask a quote | ||
| MTI-6TAC.100.450.350 | 10 | ° | 2.5 | 35 | 75 | 10 | ask a quote | |||
| MTI-6TAC.120.300.300 | 12 | 6 | 30° | 1.73 | 30 | 80 | 12 | ask a quote | ||
| MTI-6TAC.120.300.420 | 12 | ° | 1.73 | 42 | 80 | 12 | ask a quote | |||
| MTI-6TAC.120.450.300 | 12 | 6 | 45° | 3 | 30 | 80 | 12 | ask a quote | ||
| MTI-6TAC.120.450.420 | 12 | ° | 3 | 42 | 80 | 12 | ask a quote |
