Flat Drills --> 2 flutes --> End mills -->
Drills for pre-hardened steel, general steel, cast iron and
non-ferrous alloy.
A multi-function drill that allows you to process both drilling and
chamfering.
TISIN-R coating reduces stress on the edge and improves the
surface of roughness of the workpiece.
It can be applied to various of workpieces.
non-ferrous alloy.
A multi-function drill that allows you to process both drilling and
chamfering.
TISIN-R coating reduces stress on the edge and improves the
surface of roughness of the workpiece.
It can be applied to various of workpieces.
| Part Number | Diameter D | Thread | Length of cut L1 | Effective length L2 | Overall length L | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-2STD.034.080.S06 | 3.4 | M4 | 8 | 22 | 75 | ask a quote | ||
| MTI-2STD.034.120.S06 | 3.4 | M4 | 12 | 27 | 75 | ask a quote | ||
| MTI-2STD.043.100.S08 | 4.3 | M5 | 10 | 25 | 80 | ask a quote | ||
| MTI-2STD.043.150.S08 | 4.3 | M5 | 15 | 30 | 80 | ask a quote | ||
| MTI-2STD.051.120.S08 | 5.1 | M6 | 12 | 30 | 90 | ask a quote | ||
| MTI-2STD.051.180.S08 | 5.1 | M6 | 18 | 35 | 90 | ask a quote | ||
| MTI-2STD.069.160.S10 | 6.9 | M8 | 16 | 40 | 90 | ask a quote | ||
| MTI-2STD.069.240.S10 | 6.9 | M8 | 24 | 45 | 100 | ask a quote | ||
| MTI-2STD.086.200.S12 | 8.6 | M10 | 20 | 45 | 110 | ask a quote | ||
| MTI-2STD.086.300.S12 | 8.6 | M10 | 30 | 55 | 120 | ask a quote | ||
| MTI-2STD.103.240.S14 | 10.3 | M12 | 24 | 50 | 110 | ask a quote | ||
| MTI-2STD.103.360.S14 | 10.3 | M12 | 36 | 60 | 120 | ask a quote | ||
| MTI-2TBE | ask a quote |  |
