E-Series : Low Price ... --> 3 flutes --> -->

3NSE - 3 Flutes End Mills for Heavy Cuts HRc ~52  

Endmills for various work materials(~HRc52), pre-hardened
steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel.
Good wear resistance by high quality Si-based PVD coating.
Excellent work surface finish by 3 flute and deep chip pocket.
Minimize fracturing by high TRS fine(0.5 ) WC grade.
Part Number Diameter DLength of cut L1Overall length LShank dia dspecial Price
MTI-4NSE.003.060.S03 0.3 0.64034 flutes ask a quote
MTI-4NSE.004.080.S03 0.4 0.84034 flutes ask a quote
MTI-3NSE.005.100.S03 0.5 1403 ask a quote
MTI-3NSE.006.120.S03 0.6 1.2403 ask a quote
MTI-3NSE.007.160.S03 0.7 1.6403 ask a quote
MTI-3NSE.008.180.S03 0.8 1.8403 ask a quote
MTI-3NSE.009.200.S03 0.9 2403 ask a quote
MTI-3NSE.010.025.S04 1 2.5454 ask a quote
MTI-3NSE.012.030.S04 1.2 3454 ask a quote
MTI-3NSE.015.040.S04 1.5 4454 ask a quote
MTI-3NSE.020.060.S04 2 6454 ask a quote
MTI-3NSE.020.060S04.L35 2 6354 ask a quote
MTI-3NSE.025.080.S06 2.5 8456 ask a quote
MTI-3NSE.030.080.S06 3 8456 ask a quote
MTI-3NSE.040.110.S06 4 11506 ask a quote
MTI-3NSE.050.130.S06 5 13506 ask a quote
MTI-3NSE.060.130.S06 6 13556 ask a quote
MTI-3NSE.080.190.S08 8 19608 ask a quote
MTI-3NSE.100.220.S10 10 227010 ask a quote
MTI-3NSE.120.260.S12 12 268012 ask a quote
MTI-MTI-4NSE.003.060.S03 0 ask a quote
MTI-MTI-4NSE.004.080.S03 0 ask a quote