General Purpose Harde... --> 2 flutes --> --> all materials
Endmills for various work materials, hardened steel,
pre-hardened steel, tool steel and cast iron.
Good wear resistance by Si-based PVD coating.
Optimum for NC engraving, chamfering and centering with
straight 2flutes.
Resin, plastic machining applicable witn coated or non coated
endmill
pre-hardened steel, tool steel and cast iron.
Good wear resistance by Si-based PVD coating.
Optimum for NC engraving, chamfering and centering with
straight 2flutes.
Resin, plastic machining applicable witn coated or non coated
endmill
| Part Number | Diameter D | Angle | Length of cut L1 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-2STEC.000.1200.S03 | - | ° | 0.86 | 60 | 3 | ask a quote | ||
| MTI-2STEC.000.1200.S04 | 120°° | 1.15 | 60 | 4 | ask a quote | |||
| MTI-2STEC.000.1200.S06 | - | ° | 1.73 | 60 | 6 | ask a quote | ||
| MTI-2STEC.000.1200.S08 | - | ° | 2.3 | 65 | 8 | ask a quote | ||
| MTI-2STEC.000.1200.S10 | - | ° | 2.88 | 70 | 10 | ask a quote | ||
| MTI-2STEC.000.1200.S12 | - | ° | 3.46 | 75 | 12 | ask a quote | ||
| MTI-2STEC.000.300.S03 | - | 30° | 5.5 | 60 | 3 | ask a quote | ||
| MTI-2STEC.000.300.S04 | - | 30° | 7.4 | 60 | 4 | ask a quote | ||
| MTI-2STEC.000.300.S06 | - | 30° | 11.1 | 60 | 6 | ask a quote | ||
| MTI-2STEC.000.600.S03 | - | 60° | 2.5 | 60 | 3 | ask a quote | ||
| MTI-2STEC.000.600.S04 | - | 60° | 3.4 | 60 | 4 | ask a quote | ||
| MTI-2STEC.000.600.S06 | - | 60° | 5.1 | 60 | 6 | ask a quote | ||
| MTI-2STEC.000.600.S08 | - | 60° | 6.9 | 65 | 8 | ask a quote | ||
| MTI-2STEC.000.600.S10 | - | 60° | 8.6 | 70 | 10 | ask a quote | ||
| MTI-2STEC.000.600.S12 | - | 60° | 10.3 | 75 | 12 | ask a quote | ||
| MTI-2STEC.000.900.080 | - | ° | 1.5 | 80 | 3 | ask a quote | ||
| MTI-2STEC.000.900.100 | - | ° | 2 | 100 | 4 | ask a quote | ||
| MTI-2STEC.000.900.110 | - | ° | 3 | 110 | 6 | ask a quote | ||
| MTI-2STEC.000.900.120 | - | ° | 4 | 120 | 8 | ask a quote | ||
| MTI-2STEC.000.900.150 | - | ° | 5 | 150 | 10 | ask a quote | ||
| MTI-2STEC.000.900.160 | - | ° | 6 | 160 | 12 | ask a quote | ||
| MTI-2STEC.000.900.S03 | - | 90° | 1.5 | 60 | 3 | ask a quote | ||
| MTI-2STEC.000.900.S04 | - | 90° | 2 | 60 | 4 | ask a quote | ||
| MTI-2STEC.000.900.S06 | - | 90° | 3 | 60 | 6 | ask a quote | ||
| MTI-2STEC.000.900.S08 | - | 90° | 4 | 65 | 8 | ask a quote | ||
| MTI-2STEC.000.900.S10 | - | 90° | 5 | 70 | 10 | ask a quote | ||
| MTI-2STEC.000.900.S12 | - | 90° | 6 | 75 | 12 | ask a quote |
