General Purpose Harde... --> 1 flutes --> End mills --> all materials
1CHA - 1 Flutes 90 Chamfering Cutter HRc ~50 
Endmills for various work materials, hardened steel,
pre-hardened steel, tool steel and cast iron.
Good wear resistance by Si-based PVD coating.
Applied helix 1 flutes design for better performance in
corner chamfering. Minimize fracturing at high feed by high TRS fine WC grade
pre-hardened steel, tool steel and cast iron.
Good wear resistance by Si-based PVD coating.
Applied helix 1 flutes design for better performance in
corner chamfering. Minimize fracturing at high feed by high TRS fine WC grade
| Part Number | Diameter D | Diameter neck D1 | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|---|---|
| MTI-1CHA.009.900.S03 | 0.9 | 90 | 0.3 ° | 0.3 | 2.7 | 40 | 3 | ask a quote |  | |
| MTI-1CHA.012.900.S03 | 1.2 | 90 | 0.4 ° | 0.4 | 3.6 | 40 | 3 | ask a quote | | |
| MTI-1CHA.020.900.S03 | 2 | 90 | 0.6 ° | 0.7 | 6 | 40 | 3 | ask a quote | | |
| MTI-1CHA.030.900.S03 | 3 | 90 | 0.8 ° | 1.1 | 40 | 3 | ask a quote | | ||
| MTI-1CHA.040.900.S04 | 4 | 90 | 1 ° | 1.5 | 40 | 4 | ask a quote | | ||
| MTI-1CHA.060.900.S06 | 6 | 90 | 1.5 ° | 2.25 | 50 | 6 | ask a quote | | ||
| MTI-1CHA.080.900.S08 | 8 | 90 | 2 ° | 3 | 60 | 8 | ask a quote | | ||
| MTI-1CHA.100.900.S10 | 10 | 90 | 2.5 ° | 3.75 | 70 | 10 | ask a quote | | ||
| MTI-1CHA.120.900.S12 | 12 | 90 | 3 ° | 4.5 | 75 | 12 | ask a quote | | ||
| MTI-1CHA.160.900.S16 | 16 | 90 | 4 ° | 6 | 80 | 16 | ask a quote | |
