Endmills for pre-hardened and hardened steel(HRc50~)

Good wear resistance by Si-based PVD coating. High precise edge tolerance. Very nice work surface finish.

Minimize fracturing by high TRS fine(0.5㎛) WC grade

Good wear resistance by Si-based PVD coating. High precise edge tolerance. Very nice work surface finish.

Minimize fracturing by high TRS fine(0.5㎛) WC grade

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
---|---|---|---|---|---|---|---|---|---|

MTI-2CTB.002.010.015 | 0.1R X 0.2 | 1° | 1.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.002.020.015 | 0.1R X 0.2 | 2° | 1.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.002.030.015 | 0.1R X 0.2 | 3° | 1.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.002.050.015 | 0.1R X 0.2 | 5° | 1.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.002.070.015 | 0.1R X 0.2 | 7° | 1.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.002.100.015 | 0.1R X 0.2 | 10° | 1.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.010.020 | 0.15R X 0.3 | 1° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.020.020 | 0.15R X 0.3 | 2° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.030.020 | 0.15R X 0.3 | 3° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.050.020 | 0.15R X 0.3 | 5° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.070.020 | 0.15R X 0.3 | 7° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.100.020 | 0.15R X 0.3 | 10° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.003.150.020 | 0.15R X 0.3 | 15° | 2 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.010.030 | 0.2R X 0.4 | 1° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.020.030 | 0.2R X 0.4 | 2° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.030.030 | 0.2R X 0.4 | 3° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.040.030 | 0.2R X 0.4 | 4° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.050.030 | 0.2R X 0.4 | 5° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.070.030 | 0.2R X 0.4 | 7° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.100.030 | 0.2R X 0.4 | 10° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.004.150.030 | 0.2R X 0.4 | 15° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.010.030 | 0.25R X 0.5 | 1° | 3 | 40 | 4 | ask a quote | |||

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||

MTI-2CTB.005.020.030 | 0.25R X 0.5 | 2° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.030.030 | 0.25R X 0.5 | 3° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.040.035 | 0.25R X 0.5 | 4° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.050.035 | 0.25R X 0.5 | 5° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.070.035 | 0.25R X 0.5 | 7° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.100.035 | 0.25R X 0.5 | 10° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.005.150.035 | 0.25R X 0.5 | 15° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.010.030 | 0.3R X 0.6 | 1° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.020.030 | 0.3R X 0.6 | 2° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.030.030 | 0.3R X 0.6 | 3° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.040.035 | 0.3R X 0.6 | 4° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.050.035 | 0.3R X 0.6 | 5° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.070.035 | 0.3R X 0.6 | 7° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.100.035 | 0.3R X 0.6 | 10° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.006.150.035 | 0.3R X 0.6 | 15° | 3.5 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.010.030 | 0.35R X 0.7 | 1° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.020.030 | 0.35R X 0.7 | 2° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.030.040 | 0.35R X 0.7 | 3° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.050.040 | 0.35R X 0.7 | 5° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.070.040 | 0.35R X 0.7 | 7° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.100.040 | 0.35R X 0.7 | 10° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.007.150.040 | 0.35R X 0.7 | 15° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.010.030 | 0.4R X 0.8 | 1° | 3 | 40 | 4 | ask a quote | |||

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||

MTI-2CTB.008.020.030 | 0.4R X 0.8 | 2° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.030.030 | 0.4R X 0.8 | 3° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.040.040 | 0.4R X 0.8 | 4° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.050.040 | 0.4R X 0.8 | 5° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.070.040 | 0.4R X 0.8 | 7° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.100.040 | 0.4R X 0.8 | 10° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.008.150.040 | 0.4R X 0.8 | 15° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.010.003.030 | 0.5R X 1 | 0.3° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.010.010.030 | 0.5R X 1 | 1° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.010.013.040 | 0.5R X 1 | 1.3° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.010.020.040 | 0.5R X 1 | 2° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.010.030.040 | 0.5R X 1 | 3° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.010.040.060 | 0.5R X 1 | 4° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.010.050.060 | 0.5R X 1 | 5° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.010.070.060 | 0.5R X 1 | 7° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.010.100.060 | 0.5R X 1 | 10° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.010.150.056 | 0.5R X 1 | 15° | 5.6 | 45 | 4 | ask a quote | |||

MTI-2CTB.012.003.030 | 0.6R X 1.2 | 0 30° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.012.010.030 | 0.6R X 1.2 | 1° | 3 | 40 | 4 | ask a quote | |||

MTI-2CTB.012.013.040 | 0.6R X 1.2 | 1 30° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.012.020.040 | 0.6R X 1.2 | 2° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.012.030.040 | 0.6R X 1.2 | 3° | 4 | 40 | 4 | ask a quote | |||

MTI-2CTB.012.040.060 | 0.6R X 1.2 | 4° | 6 | 45 | 4 | ask a quote | |||

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||

MTI-2CTB.012.050.060 | 0.6R X 1.2 | 5° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.012.070.060 | 0.6R X 1.2 | 7° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.012.100.060 | 0.6R X 1.2 | 10° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.012.150.050 | 0.6R X 1.2 | 15° | 5 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.003.060 | 0.75R X 1.5 | 0.3° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.010.060 | 0.75R X 1.5 | 1° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.013.060 | 0.75R X 1.5 | 1.3° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.020.060 | 0.75R X 1.5 | 2° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.030.060 | 0.75R X 1.5 | 3° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.040.060 | 0.75R X 1.5 | 4° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.050.060 | 0.75R X 1.5 | 5° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.070.060 | 0.75R X 1.5 | 7° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.100.060 | 0.75R X 1.5 | 10° | 6 | 45 | 4 | ask a quote | |||

MTI-2CTB.015.150.060 | 0.75R X 1.5 | 15° | 6 | 50 | 6 | ask a quote | |||

MTI-2CTB.020.003.080 | 1R X 2 | 0.3° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.010.080 | 1R X 2 | 1° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.013.080 | 1R X 2 | 1.3° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.020.080 | 1R X 2 | 2° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.030.080 | 1R X 2 | 3° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.040.080 | 1R X 2 | 4° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.050.080 | 1R X 2 | 5° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.070.080 | 1R X 2 | 7° | 8 | 45 | 4 | ask a quote | |||

MTI-2CTB.020.100.080 | 1R X 2 | 10° | 8 | 50 | 6 | ask a quote | |||

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||

MTI-2CTB.020.150.080 | 1R X 2 | 15° | 8 | 50 | 6 | ask a quote | |||

MTI-2CTB.030.003.120 | 1.5RX3 | 0.3° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.010.120 | 1.5RX3 | 1° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.013.120 | 1.5RX3 | 1.3° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.020.120 | 1.5RX3 | 2° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.030.120 | 1.5RX3 | 3° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.040.120 | 1.5RX3 | 4° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.050.120 | 1.5RX3 | 5° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.070.120 | 1.5RX3 | 7° | 12 | 60 | 6 | ask a quote | |||

MTI-2CTB.030.100.120 | 1.5R X 3 | 10° | 12 | 60 | 8 | ask a quote | |||

MTI-2CTB.030.150.120 | 1.5R X 3 | 15° | 12 | 70 | 10 | ask a quote | |||

MTI-2CTB.040.003.160 | 2RX4 | 0.3° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.010.160 | 2RX4 | 1° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.013.160 | 2RX4 | 1.3° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.020.160 | 2RX4 | 2° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.030.160 | 2RX4 | 3° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.040.160 | 2RX4 | 4° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.050.160 | 2RX4 | 5° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.070.160 | 2RX4 | 7° | 16 | 70 | 8 | ask a quote | |||

MTI-2CTB.040.100.160 | 2R X 4 | 10° | 16 | 70 | 10 | ask a quote | |||

MTI-2CTB.040.150.160 | 2R X 4 | 15° | 16 | 80 | 12 | ask a quote | |||

MTI-2CTB.050.003.160 | 2.5RX5 | 0.3° | 20 | 75 | 8 | ask a quote | |||

MTI-2CTB.050.003.200 | 2.5R X 5 | ° | 20 | - | 75 | 8 | ask a quote | ||

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||

MTI-2CTB.050.010.160 | 2.5RX5 | 1° | 20 | 75 | 8 | ask a quote | |||

MTI-2CTB.050.010.200 | 2.5R X 5 | ° | 20 | - | 75 | 8 | ask a quote | ||

MTI-2CTB.050.013.160 | 2.5RX5 | 1.3° | 20 | 75 | 8 | ask a quote | |||

MTI-2CTB.050.013.200 | 2.5R X 5 | ° | 20 | - | 75 | 8 | ask a quote | ||

MTI-2CTB.050.020.160 | 2.5RX5 | 2° | 20 | 75 | 8 | ask a quote | |||

MTI-2CTB.050.020.200 | 2.5R X 5 | ° | 20 | - | 75 | 8 | ask a quote | ||

MTI-2CTB.050.030.160 | 2.5RX5 | 3° | 20 | 75 | 8 | ask a quote | |||

MTI-2CTB.050.030.200 | 2.5R X 5 | ° | - | 20 | 75 | 8 | ask a quote | ||

MTI-2CTB.050.040.160 | 2.5RX5 | 4° | 20 | 75 | 8 | ask a quote | |||

MTI-2CTB.050.040.200 | 2.5R X 5 | ° | 20 | - | 75 | 8 | ask a quote | ||

MTI-2CTB.050.050.160 | 2.5RX5 | 5° | 20 | 80 | 10 | ask a quote | |||

MTI-2CTB.050.050.200 | 2.5R X 5 | ° | 20 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.050.070.160 | 2.5RX5 | 7° | 20 | 80 | 10 | ask a quote | |||

MTI-2CTB.050.070.200 | 2.5R X 5 | ° | 20 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.003.160 | 3RX6 | 0.3° | 24 | 80 | 10 | ask a quote | |||

MTI-2CTB.060.003.240 | 3R X 6 | ° | 24 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.010.160 | 3RX6 | 1° | 24 | 80 | 10 | ask a quote | |||

MTI-2CTB.060.010.240 | 3R X 6 | ° | 24 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.013.160 | 3RX6 | 1.3° | 24 | 80 | 10 | ask a quote | |||

MTI-2CTB.060.013.240 | 3R X 6 | ° | 24 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.020.160 | 3RX6 | 2° | 24 | 80 | 10 | ask a quote | |||

MTI-2CTB.060.020.240 | 3R X 6 | ° | 24 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.030.160 | 3RX6 | 3° | 24 | 80 | 10 | ask a quote | |||

Part Number | Diameter D | Angle | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||

MTI-2CTB.060.030.240 | 3R X 6 | ° | 24 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.040.160 | 3RX6 | 4° | 24 | 80 | 10 | ask a quote | |||

MTI-2CTB.060.040.240 | 3R X 6 | ° | 24 | - | 80 | 10 | ask a quote | ||

MTI-2CTB.060.050.160 | 3RX6 | 5° | 24 | 90 | 12 | ask a quote | |||

MTI-2CTB.060.050.240 | 3R X 6 | ° | 24 | - | 90 | 12 | ask a quote | ||

MTI-2CTB.060.070.160 | 3RX6 | 7° | 24 | 90 | 12 | ask a quote | |||

MTI-2CTB.060.070.240 | 3R X 6 | ° | 24 | - | 90 | 12 | ask a quote |