Outstanding performan... --> 2 flutes --> End mills --> all materials
Endmill for various work materials, hardened steel(HRc~55),
pre-hardened steel, tool steel and cast iron
Good wear resistance by Si-based PVD coating.
Improve tool performance by even run-out and tolerance control.
Various flute and overall length design for covering wide range
applications as well as high efficiency machining.
Minimize edge chipping by improving corner strength.
pre-hardened steel, tool steel and cast iron
Good wear resistance by Si-based PVD coating.
Improve tool performance by even run-out and tolerance control.
Various flute and overall length design for covering wide range
applications as well as high efficiency machining.
Minimize edge chipping by improving corner strength.
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|
| MTI-2LEM.010.030.S06 | 1 | 3 | 60 | 6 | ask a quote | ||
| MTI-2LEM.010.050.S06 | 1 | 5 | 60 | 6 | ask a quote | ||
| MTI-2LEM.010.070.S06 | 1 | 7 | 60 | 6 | ask a quote | ||
| MTI-2LEM.010.100.S06 | 1 | 10 | 60 | 6 | ask a quote | ||
| MTI-2LEM.010.120.S06 | 1 | 12 | 60 | 6 | ask a quote | ||
| MTI-2LEM.010.150.S06 | 1 | 15 | 60 | 6 | ask a quote | ||
| MTI-2LEM.012.060.S06 | 1.2 | 6 | 60 | 6 | ask a quote |  | |
| MTI-2LEM.012.080.S06 | 1.2 | 8 | 60 | 6 | ask a quote | | |
| MTI-2LEM.012.100.S06 | 1.2 | 10 | 60 | 6 | ask a quote | | |
| MTI-2LEM.012.120.S06 | 1.2 | 12 | 60 | 6 | ask a quote | | |
| MTI-2LEM.015.060.S06 | 1.5 | 6 | 60 | 6 | ask a quote | ||
| MTI-2LEM.015.075.S06 | 1.5 | 7.5 | 60 | 6 | ask a quote | ||
| MTI-2LEM.015.100.S06 | 1.5 | 10 | 60 | 6 | ask a quote | ||
| MTI-2LEM.015.150.S06 | 1.5 | 15 | 60 | 6 | ask a quote | ||
| MTI-2LEM.015.200.S06 | 1.5 | 20 | 60 | 6 | ask a quote | ||
| MTI-2LEM.020.060.S06 | 2 | 6 | 60 | 6 | ask a quote | ||
| MTI-2LEM.020.100.S06 | 2 | 10 | 60 | 6 | ask a quote | ||
| MTI-2LEM.020.150.S06 | 2 | 15 | 60 | 6 | ask a quote | ||
| MTI-2LEM.020.200.S06 | 2 | 20 | 60 | 6 | ask a quote | ||
| MTI-2LEM.025.100.S06 | 2.5 | 10 | 60 | 6 | ask a quote | | |
| MTI-2LEM.025.150.S06 | 2.5 | 15 | 60 | 6 | ask a quote | | |
| MTI-2LEM.025.200.S06 | 2.5 | 20 | 60 | 6 | ask a quote | | |
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
| MTI-2LEM.030.120.S06 | 3 | 12 | 70 | 6 | ask a quote | ||
| MTI-2LEM.030.150.S06 | 3 | 15 | 70 | 6 | ask a quote | ||
| MTI-2LEM.030.200.S06 | 3 | 20 | 70 | 6 | ask a quote | ||
| MTI-2LEM.030.250.S06 | 3 | 25 | 70 | 6 | ask a quote | ||
| MTI-2LEM.030.300.S06 | 3 | 30 | 70 | 6 | ask a quote | ||
| MTI-2LEM.035.120.S06 | 3.5 | 12 | 70 | 6 | ask a quote | | |
| MTI-2LEM.035.150.S06 | 3.5 | 15 | 70 | 6 | ask a quote | | |
| MTI-2LEM.035.200.S06 | 3.5 | 20 | 70 | 6 | ask a quote | | |
| MTI-2LEM.040.150.S06 | 4 | 15 | 70 | 6 | ask a quote | ||
| MTI-2LEM.040.200.S06 | 4 | 20 | 70 | 6 | ask a quote | ||
| MTI-2LEM.040.300.S06 | 4 | 30 | 75 | 6 | ask a quote | ||
| MTI-2LEM.040.350.S06 | 4 | 35 | 75 | 6 | ask a quote | ||
| MTI-2LEM.040.400.S06 | 4 | 40 | 80 | 6 | ask a quote | ||
| MTI-2LEM.045.120.S06 | 4.5 | 12 | 70 | 6 | ask a quote | | |
| MTI-2LEM.045.150.S06 | 4.5 | 15 | 70 | 6 | ask a quote | | |
| MTI-2LEM.045.200.S06 | 4.5 | 20 | 70 | 6 | ask a quote | | |
| MTI-2LEM.050.200.S06 | 5 | 20 | 80 | 6 | ask a quote | ||
| MTI-2LEM.050.250.S06 | 5 | 25 | 70 | 6 | ask a quote | ||
| MTI-2LEM.050.300.S06 | 5 | 30 | 75 | 6 | ask a quote | ||
| MTI-2LEM.050.400.S06 | 5 | 40 | 80 | 6 | ask a quote | ||
| MTI-2LEM.060.200.100 | 6 | 20 | 100 | 6 | ask a quote | ||
| MTI-2LEM.060.200.S06 | 6 | 20 | 75 | 6 | ask a quote | ||
| MTI-2LEM.060.250.S06 | 6 | 25 | 75 | 6 | ask a quote | ||
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
| MTI-2LEM.060.300.S06 | 6 | 30 | 80 | 6 | ask a quote | ||
| MTI-2LEM.060.350.S06 | 6 | 35 | 80 | 6 | ask a quote | ||
| MTI-2LEM.060.400.S06 | 6 | 40 | 90 | 6 | ask a quote | ||
| MTI-2LEM.060.450.S06 | 6 | 45 | 90 | 6 | ask a quote | ||
| MTI-2LEM.060.500.S06 | 6 | 50 | 100 | 6 | ask a quote | ||
| MTI-2LEM.080.250.100 | 8 | 25 | 100 | 8 | ask a quote | ||
| MTI-2LEM.080.250.S08 | 8 | 25 | 75 | 8 | ask a quote | ||
| MTI-2LEM.080.300.S08 | 8 | 30 | 80 | 8 | ask a quote | ||
| MTI-2LEM.080.350.S08 | 8 | 35 | 80 | 8 | ask a quote | ||
| MTI-2LEM.080.400.S08 | 8 | 40 | 90 | 8 | ask a quote | ||
| MTI-2LEM.080.450.S08 | 8 | 45 | 100 | 8 | ask a quote | ||
| MTI-2LEM.080.500.S08 | 8 | 50 | 100 | 8 | ask a quote | ||
| MTI-2LEM.080.550.S08 | 8 | 55 | 100 | 8 | ask a quote | ||
| MTI-2LEM.080.600.S08 | 8 | 60 | 110 | 8 | ask a quote | ||
| MTI-2LEM.100.300.110 | 10 | 30 | 110 | 10 | ask a quote | ||
| MTI-2LEM.100.300.S10 | 10 | 30 | 80 | 10 | ask a quote | ||
| MTI-2LEM.100.350.S10 | 10 | 35 | 90 | 10 | ask a quote | ||
| MTI-2LEM.100.400.S10 | 10 | 40 | 90 | 10 | ask a quote | ||
| MTI-2LEM.100.450.S10 | 10 | 45 | 100 | 10 | ask a quote | ||
| MTI-2LEM.100.500.S10 | 10 | 50 | 100 | 10 | ask a quote | ||
| MTI-2LEM.100.550.S10 | 10 | 55 | 110 | 10 | ask a quote | ||
| MTI-2LEM.100.600.S10 | 10 | 60 | 110 | 10 | ask a quote | ||
| MTI-2LEM.100.650.S10 | 10 | 65 | 120 | 10 | ask a quote | ||
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
| MTI-2LEM.100.700.S10 | 10 | 70 | 120 | 10 | ask a quote | ||
| MTI-2LEM.120.300.S12 | 12 | 30 | 90 | 12 | ask a quote | ||
| MTI-2LEM.120.350.110 | 12 | 35 | 110 | 12 | ask a quote | ||
| MTI-2LEM.120.400.S12 | 12 | 40 | 100 | 12 | ask a quote | ||
| MTI-2LEM.120.450.S12 | 12 | 45 | 100 | 12 | ask a quote | ||
| MTI-2LEM.120.500.S12 | 12 | 50 | 100 | 12 | ask a quote | ||
| MTI-2LEM.120.550.S12 | 12 | 55 | 110 | 12 | ask a quote | ||
| MTI-2LEM.120.600.S12 | 12 | 60 | 110 | 12 | ask a quote | ||
| MTI-2LEM.120.700.S12 | 12 | 70 | 130 | 12 | ask a quote | ||
| MTI-2LEM.120.800.S12 | 12 | 80 | 130 | 12 | ask a quote | ||
| MTI-2LEM.140.500.S14 | 14 | 50 | 110 | 14 | ask a quote | ||
| MTI-2LEM.160.1000.S16 | 16 | 100 | 160 | 16 | ask a quote | ||
| MTI-2LEM.160.400.160 | 16 | 40 | 160 | 16 | ask a quote | ||
| MTI-2LEM.160.550.S16 | 16 | 55 | 120 | 16 | ask a quote | ||
| MTI-2LEM.160.700.S16 | 16 | 70 | 130 | 16 | ask a quote | ||
| MTI-2LEM.160.800.S16 | 16 | 80 | 160 | 16 | ask a quote | ||
| MTI-2LEM.200.1000.S20 | 20 | 100 | 200 | 20 | ask a quote | ||
| MTI-2LEM.200.500.160 | 20 | 50 | 160 | 20 | ask a quote | ||
| MTI-2LEM.200.600.S20 | 20 | 60 | 130 | 20 | ask a quote | ||
| MTI-2LEM.250.750.S25 | 25 | 75 | 160 | 25 | ask a quote |
