Kunststoffe Nichteise... --> 2 Schneiden --> Langschaftfräser --> Kunststoffe Nichteisen-
Schaftfräser für Acryl, A.B.S, Aluminium, Nichteisen
und nicht-metallische Werkstoffe.
Verbessert die Werkzeugleistung durch gleichmäßige Rundlauf- und Toleranzkontrolle.
Lange Spannuten unterstützen die Spankontrolle bei der Bearbeitung tiefer Nuten.
Hervorragende Verschleißfestigkeit durch Verwendung einer ultrafeinen WC-Güteklasse.
und nicht-metallische Werkstoffe.
Verbessert die Werkzeugleistung durch gleichmäßige Rundlauf- und Toleranzkontrolle.
Lange Spannuten unterstützen die Spankontrolle bei der Bearbeitung tiefer Nuten.
Hervorragende Verschleißfestigkeit durch Verwendung einer ultrafeinen WC-Güteklasse.
| Bestellnummer | Durchmesser D | Schneidenlänge L1 | Effektive Länge L2 | Totallänge L | Schaftdurchmesser d | Preis | ||
|---|---|---|---|---|---|---|---|---|
| MTI-2MLB.002.010.S03 | 0.1R X 0.2 | 0.4 | - | 40 | 3 | Angebotsanfrage | ||
| MTI-2MLB.002.015.S03 | 0.1R X 0.2 | 0.4 | 1.5 | 40 | 3 | Angebotsanfrage | ||
| MTI-2MLB.002.020.S03 | 0.1R X 0.2 | 0.4 | 2 | 40 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.010.S03 | 0.15R X 0.3 | 1 | - | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.015.S03 | 0.15R X 0.3 | 1 | 1.5 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.018.S03 | 0.15R X 0.3 | 1.8 | - | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.020.S03 | 0.15R X 0.3 | 1 | 2 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.025.S03 | 0.15R X 0.3 | 1 | 2.5 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.030.S03 | 0.15R X 0.3 | 1 | 3 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.003.040.S03 | 0.15R X 0.3 | 1 | 4 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.004.012.S03 | 0.2R X 0.4 | 1.2 | - | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.004.020.S03 | 0.2R X 0.4 | 2 | - | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.004.030.S03 | 0.2R X 0.4 | 1.2 | 3 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.004.040.S03 | 0.2R X 0.4 | 1.2 | 4 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.004.050.S03 | 0.2R X 0.4 | 1.2 | 5 | 45 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.015.S03 | 0.25R X 0.5 | 1.5 | - | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.020.S03 | 0.25R X 0.5 | 2 | - | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.030.S03 | 0.25R X 0.5 | 1.5 | 3 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.040.S03 | 0.25R X 0.5 | 1.5 | 4 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.050.S03 | 0.25R X 0.5 | 1.5 | 5 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.060.S03 | 0.25R X 0.5 | 1.5 | 6 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.005.080.S03 | 0.25R X 0.5 | 1.5 | 8 | 50 | 3 | Angebotsanfrage | ||
| Bestellnummer | Durchmesser D | Schneidenlänge L1 | Effektive Länge L2 | Totallänge L | Schaftdurchmesser d | Preis | ||
| MTI-2MLB.005.100.S03 | 0.25R X 0.5 | 1.5 | 10 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.006.030.S03 | 0.3R X 0.6 | 3 | - | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.006.060.S03 | 0.3R X 0.6 | 3 | 6 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.006.080.S03 | 0.3R X 0.6 | 3 | 8 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.006.100.S03 | 0.3R X 0.6 | 3 | 10 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.007.030.S03 | 0.35R X 0.7 | 3 | - | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.007.070.S03 | 0.35R X 0.7 | 3 | 7 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.007.100.S03 | 0.35R X 0.7 | 3 | 10 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.007.120.S03 | 0.35R X 0.7 | 3 | 12 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.008.040.S03 | 0.4R X 0.8 | 4 | - | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.008.080.S03 | 0.4R X 0.8 | 4 | 8 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.008.100.S03 | 0.4R X 0.8 | 4 | 10 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.008.120.S03 | 0.4R X 0.8 | 4 | 12 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.009.040.S03 | 0.45R X 0.9 | 4 | - | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.009.060.S03 | 0.45R X 0.9 | 4 | 6 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.009.080.S03 | 0.45R X 0.9 | 4 | 8 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.009.100.S03 | 0.45R X 0.9 | 4 | 10 | 50 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.050.S03 | 0.5R X 1 | 5 | - | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.050.S04 | 0.5R X 1 | 5 | - | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.010.100.S03 | 0.5R X 1 | 5 | 10 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.100.S04 | 0.5R X 1 | 5 | 10 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.010.150.S03 | 0.5R X 1 | 5 | 15 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.150.S04 | 0.5R X 1 | 5 | 15 | 80 | 4 | Angebotsanfrage | ||
| Bestellnummer | Durchmesser D | Schneidenlänge L1 | Effektive Länge L2 | Totallänge L | Schaftdurchmesser d | Preis | ||
| MTI-2MLB.010.200.S03 | 0.5R X 1 | 5 | 20 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.200.S04 | 0.5R X 1 | 5 | 20 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.010.250.S03 | 0.5R X 1 | 5 | 25 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.250.S04 | 0.5R X 1 | 5 | 25 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.010.300.S03 | 0.5R X 1 | 5 | 30 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.010.300.S04 | 0.5R X 1 | 5 | 30 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.010.350.S04 | 0.5R X 1 | 5 | 35 | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.010.400.S04 | 0.5R X 1 | 5 | 40 | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.100.S03 | 0.75R X 1.5 | 10 | - | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.015.100.S04 | 0.75R X 1.5 | 10 | - | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.150.S03 | 0.75R X 1.5 | 10 | 15 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.015.150.S04 | 0.75R X 1.5 | 10 | 15 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.200.S03 | 0.75R X 1.5 | 10 | 20 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.015.200.S04 | 0.75R X 1.5 | 10 | 20 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.250.S03 | 0.75R X 1.5 | 10 | 25 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.015.250.S04 | 0.75R X 1.5 | 10 | 25 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.300.S03 | 0.75R X 1.5 | 10 | 30 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.015.300.S04 | 0.75R X 1.5 | 10 | 30 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.350.S04 | 0.75R X 1.5 | 10 | 35 | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.015.400.S04 | 0.75R X 1.5 | 10 | 40 | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.100.S03 | 1R X 2 | 10 | - | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.020.100.S04 | 1R X 2 | 10 | - | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.150.S03 | 1R X 2 | 10 | 15 | 80 | 3 | Angebotsanfrage | ||
| Bestellnummer | Durchmesser D | Schneidenlänge L1 | Effektive Länge L2 | Totallänge L | Schaftdurchmesser d | Preis | ||
| MTI-2MLB.020.150.S04 | 1R X 2 | 10 | 15 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.200.S03 | 1R X 2 | 10 | 20 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.020.200.S04 | 1R X 2 | 10 | 20 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.250.S03 | 1R X 2 | 10 | 25 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.020.250.S04 | 1R X 2 | 10 | 25 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.300.S03 | 1R X 2 | 10 | 30 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.020.300.S04 | 1R X 2 | 10 | 30 | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.350.S03 | 1R X 2 | 10 | 35 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.020.350.S04 | 1R X 2 | 10 | 35 | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.020.400.S03 | 1R X 2 | 10 | 40 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.020.400.S04 | 1R X 2 | 10 | 40 | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.025.100.S03 | 1.25R X 2.5 | 10 | - | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.025.150.S03 | 1.25R X 2.5 | 15 | - | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.025.200.S03 | 1.25R X 2.5 | 15 | 20 | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.030.100.060 | 1.5R X 3 | 10 | - | 60 | 3 | Angebotsanfrage | ||
| MTI-2MLB.030.150.S06 | 1.5R X 3 | 15 | - | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.030.200.080 | 1.5R X 3 | 20 | - | 80 | 3 | Angebotsanfrage | ||
| MTI-2MLB.030.200.100 | 1.5R X 3 | 20 | - | 100 | 3 | Angebotsanfrage | ||
| MTI-2MLB.030.200.120 | 1.5R X 3 | 20 | - | 120 | 3 | Angebotsanfrage | ||
| MTI-2MLB.030.200.S06 | 1.5R X 3 | 15 | 20 | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.030.250.S06 | 1.5R X 3 | 15 | 25 | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.030.300.S06 | 1.5R X 3 | 15 | 30 | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.030.400.S06 | 1.5R X 3 | 15 | 40 | 100 | 6 | Angebotsanfrage | ||
| Bestellnummer | Durchmesser D | Schneidenlänge L1 | Effektive Länge L2 | Totallänge L | Schaftdurchmesser d | Preis | ||
| MTI-2MLB.040.200.080 | 2R X 4 | 20 | - | 80 | 4 | Angebotsanfrage | ||
| MTI-2MLB.040.200.100 | 2R X 4 | 20 | - | 100 | 4 | Angebotsanfrage | ||
| MTI-2MLB.040.200.130 | 2R X 4 | 20 | - | 130 | 4 | Angebotsanfrage | ||
| MTI-2MLB.040.200.S06 | 2R X 4 | 20 | - | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.040.250.S06 | 2R X 4 | 20 | 25 | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.040.300.S06 | 2R X 4 | 20 | 30 | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.040.400.S06 | 2R X 4 | 20 | 40 | 120 | 6 | Angebotsanfrage | ||
| MTI-2MLB.040.500.S06 | 2R X 4 | 20 | 50 | 120 | 6 | Angebotsanfrage | ||
| MTI-2MLB.050.300.100 | 2.5R X 5 | 30 | - | 100 | 5 | Angebotsanfrage | ||
| MTI-2MLB.050.300.120 | 2.5R X 5 | 30 | - | 120 | 5 | Angebotsanfrage | ||
| MTI-2MLB.060.300.080 | 3R X 6 | 30 | - | 80 | 6 | Angebotsanfrage | ||
| MTI-2MLB.060.400.100 | 3R X 6 | 40 | - | 100 | 6 | Angebotsanfrage | ||
| MTI-2MLB.060.400.120 | 3R X 6 | 40 | - | 120 | 6 | Angebotsanfrage | ||
| MTI-2MLB.060.400.150 | 3R X 6 | 40 | - | 150 | 6 | Angebotsanfrage | ||
| MTI-2MLB.080.450.120 | 4R X 8 | 45 | - | 120 | 8 | Angebotsanfrage | ||
| MTI-2MLB.080.450.150 | 4R X 8 | 45 | - | 150 | 8 | Angebotsanfrage | ||
| MTI-2MLB.100.500.120 | 5R X 10 | 50 | - | 120 | 10 | Angebotsanfrage | ||
| MTI-2MLB.100.500.150 | 5R X 10 | 50 | - | 150 | 10 | Angebotsanfrage | ||
| MTI-2MLB.120.550.130 | 6R X 12 | 55 | - | 130 | 12 | Angebotsanfrage | ||
| MTI-2MLB.120.550.150 | 6R X 12 | 55 | - | 150 | 12 | Angebotsanfrage | ||
| MTI-2MLB.160.700.160 | 8R X 16 | 70 | - | 160 | 16 | Angebotsanfrage |
