UWC Fraise pour alumi... --> 3 dents --> Fraises à hélices --> UWC Fraise pour aluminiu
Endmills for Aluminum, AL alloy, non-ferrous and
non-metallic materials.
By 25-degree helix flute edge design with the after-treatment process,
when milling workpiece, it enables superior mirror surface milling.
Minimize fracturing by high TRS fine(0.5 ) WC grade.
non-metallic materials.
By 25-degree helix flute edge design with the after-treatment process,
when milling workpiece, it enables superior mirror surface milling.
Minimize fracturing by high TRS fine(0.5 ) WC grade.
| Numéro d'outil | Diamètre D | Longueur de coupe L1 | Longueur générale L | Diamètre de queue d | Prix | ||
|---|---|---|---|---|---|---|---|
| MTI-3FALE.060.170.S06 | 6 | 17 | 60 | 6 | demander prix | ||
| MTI-3FALE.060.220.S06 | 6 | 22 | 65 | 6 | demander prix | ||
| MTI-3FALE.080.260.S08 | 8 | 26 | 70 | 8 | demander prix | ||
| MTI-3FALE.080.360.S08 | 8 | 36 | 80 | 8 | demander prix | ||
| MTI-3FALE.100.310.S10 | 10 | 31 | 80 | 10 | demander prix | ||
| MTI-3FALE.100.410.S10 | 10 | 41 | 90 | 10 | demander prix | ||
| MTI-3FALE.120.360.S12 | 12 | 36 | 90 | 12 | demander prix | ||
| MTI-3FALE.120.460.S12 | 12 | 46 | 100 | 12 | demander prix | ||
| MTI-3FALE.160.460.S16 | 16 | 46 | 100 | 16 | demander prix | ||
| MTI-3FALE.160.660.S16 | 16 | 66 | 120 | 16 | demander prix |
