E-Series : Low Price ... --> 3 flutes --> -->
Endmills for various work materials(~HRc52), pre-hardened
steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel.
Good wear resistance by high quality Si-based PVD coating.
Excellent work surface finish by 3 flute and deep chip pocket.
Minimize fracturing by high TRS fine(0.5 ) WC grade.
steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel.
Good wear resistance by high quality Si-based PVD coating.
Excellent work surface finish by 3 flute and deep chip pocket.
Minimize fracturing by high TRS fine(0.5 ) WC grade.
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | special | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-4NSE.003.060.S03 | 0.3 | 0.6 | 40 | 3 | 4 flutes | ask a quote |  | |
| MTI-4NSE.004.080.S03 | 0.4 | 0.8 | 40 | 3 | 4 flutes | ask a quote | | |
| MTI-3NSE.005.100.S03 | 0.5 | 1 | 40 | 3 | ask a quote | | ||
| MTI-3NSE.006.120.S03 | 0.6 | 1.2 | 40 | 3 | ask a quote | | ||
| MTI-3NSE.007.160.S03 | 0.7 | 1.6 | 40 | 3 | ask a quote | | ||
| MTI-3NSE.008.180.S03 | 0.8 | 1.8 | 40 | 3 | ask a quote | | ||
| MTI-3NSE.009.200.S03 | 0.9 | 2 | 40 | 3 | ask a quote | | ||
| MTI-3NSE.010.025.S04 | 1 | 2.5 | 45 | 4 | ask a quote | |||
| MTI-3NSE.012.030.S04 | 1.2 | 3 | 45 | 4 | ask a quote | |||
| MTI-3NSE.015.040.S04 | 1.5 | 4 | 45 | 4 | ask a quote | |||
| MTI-3NSE.020.060.S04 | 2 | 6 | 45 | 4 | ask a quote | |||
| MTI-3NSE.025.080.S06 | 2.5 | 8 | 45 | 6 | ask a quote | | ||
| MTI-3NSE.030.080.S06 | 3 | 8 | 45 | 6 | ask a quote | |||
| MTI-3NSE.040.110.S06 | 4 | 11 | 50 | 6 | ask a quote | |||
| MTI-3NSE.050.130.S06 | 5 | 13 | 50 | 6 | ask a quote | |||
| MTI-3NSE.060.130.S06 | 6 | 13 | 55 | 6 | ask a quote | |||
| MTI-3NSE.080.190.S08 | 8 | 19 | 60 | 8 | ask a quote | |||
| MTI-3NSE.100.220.S10 | 10 | 22 | 70 | 10 | ask a quote | |||
| MTI-3NSE.120.260.S12 | 12 | 26 | 80 | 12 | ask a quote | |||
| MTI-MTI-4NSE.003.060.S03 | 0 | ask a quote |  | |||||
| MTI-MTI-4NSE.004.080.S03 | 0 | ask a quote | |
