Taper --> 4-6 flutes --> Taper end mill J-Max coating suitable for 5 axes CNC milling --> all materials
4-6CTDB - 4-6 Flutes Taper Ball End Mills HRc 50~ 
Endmills for pre-hardened and hardened steel(HRc50~)
Good wear resistance by Si-based PVD coating. High precise edge tolerance. Very nice work surface finish.
Minimize fracturing by high TRS fine(0.5㎛) WC grade
Good wear resistance by Si-based PVD coating. High precise edge tolerance. Very nice work surface finish.
Minimize fracturing by high TRS fine(0.5㎛) WC grade
| Part Number | Diameter D | Diameter neck D1 | Angle | Large Radius R1 | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MTI-4CTDB.010.013.047 | 0.5R X 1 | 4 | 50° | 4.7 | 13 | 0.5 | 10 | 2 | ask a quote | ||
| MTI-4CTDB.015.020.071 | 0.75R X 1.5 | 4 | 50° | 7.1 | 20 | 0.75 | 10 | 4 | ask a quote | ||
| MTI-4CTDB.020.025.094 | 1R X 2 | 6 | 60° | 9.4 | 25 | 1 | 10 | 5 | ask a quote | ||
| MTI-4CTDB.020.350.116 | 1R X 2 | 8 | 80° | 11.6 | 350 | 1 | 15 | 7 | ask a quote | ||
| MTI-4CTDB.030.040.141 | 1.5R X 3 | 8 | 80° | 14.1 | 40 | 1.5 | 10 | 7 | ask a quote | ||
| MTI-6CTDB.040.050.187 | 2R X 4 | 12 | 100° | 18.7 | 50 | 2 | 10 | 10 | ask a quote | ||
| MTI-6CTDB.040.750.124 | 2R X 4 | 16 | 110° | 12.4 | 750 | 2 | 30 | 0 | ask a quote | ||
| MTI-6CTDB.060.075.200 | 3R X 6 | 12 | 100° | 20 | 75 | 3 | 10 | 0 | ask a quote | ||
| MTI-6CTDB.060.1000.167 | 3R X 6 | 16 | 110° | 16.7 | 1000 | 3 | 20 | 0 | ask a quote | ||
| MTI-6CTDB.080.1000.267 | 4R X 8 | 16 | 110° | 26.7 | 1000 | 4 | 10 | 0 | ask a quote | ||
| MTI-6CTDB.080.100.268 | 4R X 8 | 12 | 110° | 26.8 | 100 | 4 | 5 | 0 | ask a quote |
