Outils de filetage --> 4 dents --> Outils de filetage -->
Thread Mill for hardened steel(~Hrc50), alloy steel, carbon
steel, cast iron.
Effective coolant supply is possible through the inner holes.
Remove the fusion of chips by supplying cutting oil directly to
the cutting area.
We do not recommend using a ER Chuck.
steel, cast iron.
Effective coolant supply is possible through the inner holes.
Remove the fusion of chips by supplying cutting oil directly to
the cutting area.
We do not recommend using a ER Chuck.
| Numéro d'outil | Diamètre D | Thread | Pitch P | Dents | Guide Hole | Longueur de coupe L1 | Longueur générale L | Diamètre de queue d | Prix | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MTI-4BSTM.059.103.S06 | 5.9 | 1/16-28C BSP | 28 | 10 | 6.7 | 10.3 | 60 | 6 | demander prix | ||
| MTI-4BSTM.076.5103.S08 | 7.65 | 1/8-28C BSPT | 28 | 10 | 8.7 | 10.3 | 60 | 8 | demander prix | ||
| MTI-4BSTM.099.152.S10 | 9.9 | 1/4-19C BSPT | 19 | 10 | 11.8 | 15.2 | 70 | 10 | demander prix | ||
| MTI-4BSTM.111.5152.S12 | 11.15 | 3/8-19C BSPT | 19 | 10 | 15.2 | 15.2 | 70 | 12 | demander prix | ||
| MTI-4BSTM.142.5224.S16 | 14.25 | 1/2(3/4)-14C | 14 | 10 | 19 | 22.4 | 90 | 16 | demander prix |
