Taper --> 4 flutes --> Taper end mill J-Max coating suitable for 5 axes CNC milling --> all materials
Endmills for pre-hardened and hardened steel(HRc50~)
Good wear resistance by Si-based PVD coating.
High precise edge tolerance.
Very nice work surface finish.
Minimize fracturing by high TRS fine(0.5㎛) WC grade.
Good wear resistance by Si-based PVD coating.
High precise edge tolerance.
Very nice work surface finish.
Minimize fracturing by high TRS fine(0.5㎛) WC grade.
| Part Number | Diameter D | Angle | Length of cut L1 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-4CTE.030.003.110 | 3 | 0.3° | 11 | 50 | 6 | ask a quote | ||
| MTI-4CTE.030.010.110 | 3 | 1° | 11 | 50 | 6 | ask a quote | ||
| MTI-4CTE.030.013.110 | 3 | 1.3° | 11 | 50 | 6 | ask a quote | ||
| MTI-4CTE.030.020.150 | 3 | 2° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.030.023.150 | 3 | 2.3° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.030.030.150 | 3 | 3° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.030.050.150 | 3 | 5° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.030.070.120 | 3 | 7° | 12 | 60 | 6 | ask a quote | ||
| MTI-4CTE.030.100.190 | 3 | 10° | 19 | 80 | 10 | ask a quote | ||
| MTI-4CTE.040.003.150 | 4 | 0.3° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.040.010.150 | 4 | 1° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.040.013.150 | 4 | 1.3° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.040.020.180 | 4 | 2° | 18 | 60 | 6 | ask a quote | ||
| MTI-4CTE.040.023.180 | 4 | 2.3° | 18 | 60 | 6 | ask a quote | ||
| MTI-4CTE.040.030.180 | 4 | 3° | 18 | 60 | 6 | ask a quote | ||
| MTI-4CTE.040.050.230 | 4 | 5° | 23 | 65 | 8 | ask a quote | ||
| MTI-4CTE.040.070.250 | 4 | 7° | 25 | 75 | 10 | ask a quote | ||
| MTI-4CTE.050.003.180 | 5 | 0.3° | 18 | 60 | 6 | ask a quote | ||
| MTI-4CTE.050.010.180 | 5 | 1° | 18 | 60 | 6 | ask a quote | ||
| MTI-4CTE.050.013.180 | 5 | 1.3° | 18 | 60 | 6 | ask a quote | ||
| MTI-4CTE.050.020.150 | 5 | 2° | 15 | 60 | 6 | ask a quote | ||
| MTI-4CTE.050.023.200 | 5 | 2.3° | 20 | 65 | 8 | ask a quote | ||
| Part Number | Diameter D | Angle | Length of cut L1 | Overall length L | Shank dia d | Price | ||
| MTI-4CTE.050.030.210 | 5 | 3° | 21 | 65 | 8 | ask a quote | ||
| MTI-4CTE.050.050.280 | 5 | 5° | 28 | 80 | 10 | ask a quote | ||
| MTI-4CTE.050.070.280 | 5 | 7° | 28 | 80 | 12 | ask a quote | ||
| MTI-4CTE.052.0147.120 | 5.2 | 1 47° | 12 | 60 | 6 | ask a quote |  | |
| MTI-4CTE.060.003.200 | 6 | 0.3° | 20 | 65 | 8 | ask a quote | ||
| MTI-4CTE.060.010.200 | 6 | 1° | 20 | 65 | 8 | ask a quote | ||
| MTI-4CTE.060.013.200 | 6 | 1.3° | 20 | 65 | 8 | ask a quote | ||
| MTI-4CTE.060.020.200 | 6 | 2° | 20 | 65 | 8 | ask a quote | ||
| MTI-4CTE.060.023.200 | 6 | 2.3° | 20 | 65 | 8 | ask a quote | ||
| MTI-4CTE.060.030.260 | 6 | 3° | 26 | 75 | 10 | ask a quote | ||
| MTI-4CTE.060.050.230 | 6 | 5° | 23 | 75 | 10 | ask a quote | ||
| MTI-4CTE.060.070.240 | 6 | 7° | 24 | 80 | 12 | ask a quote | ||
| MTI-4CTE.060.100.390 | 6 | 10° | 39 | 110 | 20 | ask a quote | | |
| MTI-4CTE.080.003.250 | 8 | 0.3° | 25 | 75 | 10 | ask a quote | ||
| MTI-4CTE.080.010.250 | 8 | 1° | 25 | 75 | 10 | ask a quote | ||
| MTI-4CTE.080.013.250 | 8 | 1.3° | 25 | 75 | 10 | ask a quote | ||
| MTI-4CTE.080.020.250 | 8 | 2° | 25 | 75 | 10 | ask a quote | ||
| MTI-4CTE.080.023.230 | 8 | 2.3° | 23 | 75 | 10 | ask a quote | ||
| MTI-4CTE.080.030.300 | 8 | 3° | 30 | 80 | 12 | ask a quote | ||
| MTI-4CTE.080.050.230 | 8 | 5° | 23 | 85 | 12 | ask a quote | ||
| MTI-4CTE.085.0147.240 | 8.5 | 1 47° | 24 | 75 | 10 | ask a quote | | |
| MTI-4CTE.100.003.300 | 10 | 0.3° | 30 | 80 | 12 | ask a quote | ||
| MTI-4CTE.100.010.300 | 10 | 1° | 30 | 80 | 12 | ask a quote | ||
| MTI-4CTE.100.013.300 | 10 | 1.3° | 30 | 80 | 12 | ask a quote | ||
| MTI-4CTE.100.0147.320 | 10 | 1 47° | 32 | 85 | 12 | ask a quote | | |
| MTI-4CTE.100.020.280 | 10 | 2° | 28 | 80 | 12 | ask a quote | ||
| MTI-4CTE.100.030.400 | 10 | 3° | 40 | 100 | 16 | ask a quote | ||
| MTI-4CTE.100.050.340 | 10 | 5° | 34 | 100 | 16 | ask a quote |
