4NSE - 4 Flutes End Mills for Heavy Cuts HRc ~52  

Endmills for various work materials(~HRc52), pre-hardened
steel, carbon steel, mold steel, SUS, Ti/Ni-base alloy, Inconel.
Good wear resistance by high quality Si-based PVD coating.
Minimize chattering by unequal flute spacing design.
Minimize fracturing by high TRS fine(0.5 ) WC grade
Part Number Diameter DLength of cut L1Effective length L2Overall length LShank dia d Price
MTI-4NSE.010.025.S04 1 2.5-454 ask a quote
MTI-4NSE.010.040.S04 1 2.54454 ask a quote
MTI-4NSE.012.030.S04 1.2 3-454 ask a quote
MTI-4NSE.012.050.S04 1.2 35454 ask a quote
MTI-4NSE.015.040.S04 1.5 4-454 ask a quote
MTI-4NSE.015.060.S04 1.5 46454 ask a quote
MTI-4NSE.020.060.S04 2 6-454 ask a quote
MTI-4NSE.020.100.S04 2 610454 ask a quote
MTI-4NSE.025.070.S04 2.5 7-454 ask a quote
MTI-4NSE.025.100.S04 2.5 710454 ask a quote
MTI-4NSE.030.080.S06 3 8-506 ask a quote
MTI-4NSE.030.100.S06 3 10-506 ask a quote
MTI-4NSE.030.120.S06 3 812506 ask a quote
MTI-4NSE.040.100.S06 4 10-506 ask a quote
MTI-4NSE.040.120.S06 4 12-506 ask a quote
MTI-4NSE.040.160.S06 4 1016506 ask a quote
MTI-4NSE.050.120.S06 5 12-556 ask a quote
MTI-4NSE.050.160.S06 5 16-556 ask a quote
MTI-4NSE.050.200.S06 5 1220556 ask a quote
MTI-4NSE.060.130.S06 6 13-556 ask a quote
MTI-4NSE.060.180.S06 6 18-556 ask a quote
MTI-4NSE.060.210.055 6 1321556 ask a quote
Part Number Diameter DLength of cut L1Effective length L2Overall length LShank dia d Price
MTI-4NSE.080.200.S08 8 20-608 ask a quote
MTI-4NSE.080.250.S08 8 25-708 ask a quote
MTI-4NSE.080.270.070 8 2027708 ask a quote
MTI-4NSE.100.220.S10 10 22-7010 ask a quote
MTI-4NSE.100.300.S10 10 30-7510 ask a quote
MTI-4NSE.100.320.075 10 22327510 ask a quote
MTI-4NSE.120.260.S12 12 26-7512 ask a quote
MTI-4NSE.120.300.S12 12 30-8012 ask a quote
MTI-4NSE.120.380.080 12 26388012 ask a quote
MTI-4NSE.140.320.090 14 32-9014 ask a quote
MTI-4NSE.160.450.S16 16 35459016 ask a quote
MTI-4NSE.200.520.S20 20 405210020 ask a quote