SUS Alloy Steel and h... --> 4 flutes --> Radius end mill --> SUS Alloy Steel and hard
Endmills for alloy steel, SUS, Ti/Ni base alloy, Inconel and hard to cut materials.
JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
Minimize chattering by unequal flute spacing design. Excellent work surface finish by 4 flute and deep chip pocket. Minimize fracturing at high feed by high TRS fine WC grade.
JCRO coating provides wear resistance improvement as well as avoid edge stress in various applications.
Minimize chattering by unequal flute spacing design. Excellent work surface finish by 4 flute and deep chip pocket. Minimize fracturing at high feed by high TRS fine WC grade.
| Part Number | Diameter D | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|---|
| MTI-4SUCR.010.001.050 | 1*R0.1 | 1.5 | 5 | 60 | 4 | ask a quote | ||
| MTI-4SUCR.010.001.060 | 1 X R0.1 | 1.5 | 6 | 60 | 0 | ask a quote |  | |
| MTI-4SUCR.010.001.080 | 1 X R0.1 | 1.5 | 8 | 60 | 0 | ask a quote | | |
| MTI-4SUCR.020.001.100 | 2*R0.1 | 3 | 10 | 60 | 4 | ask a quote | ||
| MTI-4SUCR.020.001.120 | 2 X R0.1 | 3 | 12 | 60 | 0 | ask a quote | | |
| MTI-4SUCR.020.001.160 | 2 X R0.1 | 3 | 16 | 60 | 0 | ask a quote | | |
| MTI-4SUCR.020.002.100 | 2*R0.2 | 3 | 10 | 60 | 4 | ask a quote | ||
| MTI-4SUCR.020.002.120 | 2 X R0.2 | 3 | 12 | 60 | 0 | ask a quote | | |
| MTI-4SUCR.020.002.160 | 2 X R0.2 | 3 | 16 | 60 | 0 | ask a quote | | |
| MTI-4SUCR.030.002.150 | 3*R0.2 | 4.5 | 15 | 65 | 6 | ask a quote | ||
| MTI-4SUCR.030.002.200 | 3 X R0.2 | 4.5 | 20 | 70 | 0 | ask a quote | | |
| MTI-4SUCR.030.005.150 | 3*R0.5 | 4.5 | 15 | 65 | 6 | ask a quote | ||
| MTI-4SUCR.030.005.200 | 3 X R0.5 | 4.5 | 20 | 70 | 0 | ask a quote | | |
| MTI-4SUCR.040.002.200 | 4*R0.2 | 6 | 20 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.040.002.300 | 4 X R0.2 | 6 | 30 | 80 | 0 | ask a quote | | |
| MTI-4SUCR.040.005.200 | 4*R0.5 | 6 | 20 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.040.005.300 | 4 X R0.5 | 6 | 30 | 80 | 0 | ask a quote | | |
| MTI-4SUCR.040.010.200 | 4*R1 | 6 | 20 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.050.002.250 | 5*R0.2 | 7.5 | 25 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.050.002.360 | 5 X R0.2 | 7.5 | 36 | 80 | 0 | ask a quote | | |
| MTI-4SUCR.050.005.250 | 5*R0.5 | 7.5 | 25 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.050.005.360 | 5 X R0.5 | 7.5 | 36 | 80 | 0 | ask a quote | | |
| Part Number | Diameter D | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
| MTI-4SUCR.050.010.250 | 5*R1 | 7.5 | 25 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.060.003.300 | 6*R0.3 | 9 | 30 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.060.003.400 | 6 X R0.3 | 9 | 40 | 80 | 0 | ask a quote | | |
| MTI-4SUCR.060.005.300 | 6*R0.5 | 9 | 30 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.060.005.400 | 6 X R0.5 | 9 | 40 | 80 | 0 | ask a quote | | |
| MTI-4SUCR.060.010.300 | 6*R1 | 9 | 30 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.060.010.400 | 6 X R1 | 9 | 40 | 80 | 0 | ask a quote | | |
| MTI-4SUCR.060.015.300 | 6*R1.5 | 9 | 30 | 70 | 6 | ask a quote | ||
| MTI-4SUCR.070.003.350 | 7*R0.3 | 10 | 35 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.070.005.350 | 7*R0.5 | 10 | 35 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.070.010.350 | 7*R1 | 10 | 35 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.080.003.400 | 8*R0.3 | 12 | 40 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.080.005.400 | 8*R0.5 | 12 | 40 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.080.010.400 | 8*R1 | 12 | 40 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.080.015.400 | 8*R1.5 | 12 | 40 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.080.020.400 | 8*R2 | 12 | 40 | 80 | 8 | ask a quote | ||
| MTI-4SUCR.090.003.450 | 9*R0.3 | 13 | 45 | 90 | 10 | ask a quote | ||
| MTI-4SUCR.090.005.450 | 9*R0.5 | 13 | 45 | 90 | 10 | ask a quote | ||
| MTI-4SUCR.090.010.450 | 9*R1 | 13 | 45 | 90 | 10 | ask a quote | ||
| MTI-4SUCR.100.003.500 | 10*R0.3 | 15 | 50 | 100 | 10 | ask a quote | ||
| MTI-4SUCR.100.005.500 | 10*R0.5 | 15 | 50 | 100 | 10 | ask a quote | ||
| MTI-4SUCR.100.010.500 | 10*R1 | 15 | 50 | 100 | 10 | ask a quote | ||
| MTI-4SUCR.100.015.500 | 10*R1.5 | 15 | 50 | 100 | 10 | ask a quote | ||
| Part Number | Diameter D | Length of cut L1 | Effective length L2 | Overall length L | Shank dia d | Price | ||
| MTI-4SUCR.100.020.500 | 10*R2 | 15 | 50 | 100 | 10 | ask a quote | ||
| MTI-4SUCR.110.003.550 | 11*R0.3 | 16 | 55 | 100 | 12 | ask a quote | ||
| MTI-4SUCR.110.005.550 | 11*R0.5 | 16 | 55 | 100 | 12 | ask a quote | ||
| MTI-4SUCR.110.010.550 | 11*R1 | 16 | 55 | 100 | 12 | ask a quote | ||
| MTI-4SUCR.120.003.600 | 12*R0.3 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.120.005.600 | 12*R0.5 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.120.010.600 | 12*R1 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.120.015.600 | 12*R1.5 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.120.020.600 | 12*R2 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.120.025.600 | 12*R2.5 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.120.030.600 | 12*R3 | 18 | 60 | 110 | 12 | ask a quote | ||
| MTI-4SUCR.160.005.800 | 16*R0.5 | 24 | 80 | 130 | 16 | ask a quote | ||
| MTI-4SUCR.160.010.800 | 16*R1 | 24 | 80 | 130 | 16 | ask a quote | ||
| MTI-4SUCR.160.015.800 | 16*R1.5 | 24 | 80 | 130 | 16 | ask a quote | ||
| MTI-4SUCR.160.020.800 | 16*R2 | 24 | 80 | 130 | 16 | ask a quote | ||
| MTI-4SUCR.160.030.800 | 16*R3 | 24 | 80 | 130 | 16 | ask a quote | ||
| MTI-4SUCR.200.0051.000 | 20*R0.5 | 30 | 100 | 150 | 20 | ask a quote | ||
| MTI-4SUCR.200.0101.000 | 20*R1 | 30 | 100 | 150 | 20 | ask a quote | ||
| MTI-4SUCR.200.0151.000 | 20*R1.5 | 30 | 100 | 150 | 20 | ask a quote | ||
| MTI-4SUCR.200.0201.000 | 20*R2 | 30 | 100 | 150 | 20 | ask a quote | ||
| MTI-4SUCR.200.0301.000 | 20*R3 | 30 | 100 | 150 | 20 | ask a quote | ||
| MTI-4SUCR.200.0501.000 | 20*R5 | 30 | 100 | 150 | 20 | ask a quote |
