Hard Steels High spee... --> 6 flutes --> --> Hard Steels High speed p
Endmills for pre-hardened and hardened steel(HRc52~70)
Good wear resistance by high quality Si-based PVD coating.
Designed for low speed with high feed condition.
Suitable for heavy duty and roughing application.
Minimize fracturing at high feed by high TRS ultra fine WC grade.
Good wear resistance by high quality Si-based PVD coating.
Designed for low speed with high feed condition.
Suitable for heavy duty and roughing application.
Minimize fracturing at high feed by high TRS ultra fine WC grade.
| Part Number | Diameter D | Length of cut L1 | Overall length L | Shank dia d | Price | ||
|---|---|---|---|---|---|---|---|
| MTI-6JJRC.060.005.060 | 6 X R0.5 | 12 | 60 | 6 | ask a quote | ||
| MTI-6JJRC.060.010.060 | 6 X R1 | 12 | 60 | 6 | ask a quote | ||
| MTI-6JJRC.080.005.060 | 8 X R0.5 | 16 | 60 | 8 | ask a quote | ||
| MTI-6JJRC.080.010.060 | 8 X R1 | 16 | 60 | 8 | ask a quote | ||
| MTI-6JJRC.080.020.060 | 8 X R2 | 16 | 60 | 8 | ask a quote | ||
| MTI-6JJRC.100.005.070 | 10 X R0.5 | 20 | 70 | 10 | ask a quote | ||
| MTI-6JJRC.100.010.070 | 10 X R1 | 20 | 70 | 10 | ask a quote | ||
| MTI-6JJRC.100.020.070 | 10 X R2 | 20 | 70 | 10 | ask a quote | ||
| MTI-6JJRC.120.005.080 | 12 X R0.5 | 25 | 80 | 12 | ask a quote | ||
| MTI-6JJRC.120.010.080 | 12 X R1 | 25 | 80 | 12 | ask a quote | ||
| MTI-6JJRC.120.020.080 | 12 X R2 | 25 | 80 | 12 | ask a quote | ||
| MTI-6JJRC.160.005.100 | 16*R0.5 | 30 | 100 | 16 | ask a quote | ||
| MTI-6JJRC.160.005.160 | 16 X R0.5 | 30 | 160 | 16 | ask a quote | ||
| MTI-6JJRC.160.010.100 | 16 X R1 | 30 | 100 | 16 | ask a quote | ||
| MTI-6JJRC.160.010.160 | 16 X R1 | 30 | 160 | 16 | ask a quote |